Go back to the Home Page About the Company Our Products and Solutions Performance Warranty Certified Installer Contact Us
 
 


IT-TD200 OTDR

This OTDR is suitable for testing a wide spectrum of fiber applications, ranging from Telenet and WDM to MAN, FTTH and LAN network.

Check it out now.




Infilink Technologies is a worldwide infrastructure solution provider of Network Infrastructure Solutions for Copper, Fiber, as well as Test and Measurement devices, and came into existence in 1998 to serve the ever growing demands of Telecommunication and Information Technology industries.

Infilink Technologies also provides 25 Year Perfomance Guarantee for Infilink Certified End to End Installations - worth to serve you quality Infrastructure network solutions for many years to come. The superb quality of offered solutions is backed by UL, ETL and ISO Certifications, putting customer mind at ease on all aspects of physical layer.




 

Download the entire
Infilink Catalogue (4 mb).

Fiber Optics Splice Closure

Fiber Optics Splice Closure
IP-FT6001

IP-FT6001 is an arc and horizontal type with one hinge in one side and open in another side. Two pieces of insert plates and fixing bolts are used to fix and seal FOSC (Fiber Optic Splice Closure). The FOSC (Fiber Optic Splice Closure) is suitable for protecting fiber cable splices in straight-through and branching applications. It can be placed in underground, aerial, wall-mounting, hand hole-mounting and duct- mounting applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic PC by numerical control equipment, therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splice closure during pulling, torsioning and impacting.

The IP-FT6001 has the following outstanding features:

  • Advanced internal structure design
  • Easy to re-enter, it never requires re-entry kits.
  • Fiber optic splice tray is designed in SLIDE-IN-LOCK and its opening angle is above 90 degree. Therefore it is easy and fast to increase and reduce FOST (Fiber Optic Splice Tray).
  • The housing of FOSC (Fiber Optic Splice Closure) is spacious in particular, while straight through fiber cable is for branching application, fibers not cut off are for straight-through after being fixed and winded, fibers cut off are for branching after fusion splicing with fibers of other branching fiber cable.

All of the above features make it easy and convenient for installation, maintenance and reuse. If required, the earthing deriving device can be installed on the housing of FOSC (Fiber Optic Splice Closure) for deriving metallic parts of fiber cable for earthing connection. Pressure testing valve can be installed as well for pressure testing and sealing testing after injection air.

Fiber Optics Splice Closure
IP-FT6002

IP-FT6002 is an arc and horizontal type with one hinge in one side and open in another side. Two pieces of insert plates and fixing bolts are used to fix and seal FOSC (Fiber Optic Splice Closure). The FOSC (Fiber Optic Splice Closure) is suitable for protecting fiber cable splices in straight-through and branching applications. It can be placed in underground, aerial, wall-mounting, hand hole-mounting and duct-mounting applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic PC by numerical control equipment, therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splice closure during pulling, torsioning and impacting.

The IP-FT6002 has the following outstanding features:

  • Advanced internal structure design
  • Easy to re-enter, it never requires re-entry kits.
  • Fiber optic splice tray is designed in SLIDE-IN-LOCK and its opening angle is above 90 degree. Therefore it is easy and fast to increase and reduce FOST (Fiber Optic Splice Tray).

All of the above features make it easy and convenient for installation, maintenance and reuse. If required, the earthing deriving device can be installed on the housing of FOSC (Fiber Optic Splice Closure) for deriving metallic parts of fiber cable for earthing connection. Pressure testing valve can be installed as well for pressure testing and sealing testing after injection air.

Fiber Optics Splice Closure
IP-FT6003

IP-FT6003 is an arc and horizontal type with one hinge in one side and open in another side. Fixing bolts are used to fix and seal FOSC (Fiber Optic Splice Closure).

The FOSC (Fiber Optic Splice Closure) is suitable for protecting fiber cable splices in straight-through and branching applications. It can be placed in underground, aerial, wall-mounting, hand hole-mounting and duct-mounting applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic PC by numerical control equipment, therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation.

The IP-FT6003 has the following outstanding features:

  • Advanced internal structure design
  • Easy to re-enter, it never requires re-entry kits.
  • Fiber optic splice tray is designed in SLIDE-IN-LOCK and its opening angle is above 90 degree. Therefore it is easy and fast to increase and reduce FOST (Fiber Optic Splice Tray).

All of the above features make it easy and convenient for installation, maintenance and reuse. If required, the earthing deriving device can be installed on the housing of FOSC (Fiber Optic Splice Closure) for deriving metallic parts of fiber cable for earthing connection. Pressure testing valve can be installed as well for pressure testing and sealing testing after injection air.

IP-FT6003 consists of one set of elastic seal fitting, our company patent product, which, based on an advanced formula, is made of injection-molded, high quality elastic sealing material by numerical control equipment.

Fiber Optics Splice Closure
IP-FT6004

IP-FT6004 is an arc and horizontal type a few fixing bolts are used to fix and seal FOSC (Fiber Optic Splice Closure). The FOSC (Fiber Optic Splice Closure) is suitable for protecting fiber cable splices in straight-through and branching applications. It can be placed in underground, aerial, wall mounting, hand hole mounting and duct mounting applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic PC by numerical control equipment, therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splice closure during pulling, torsioning and impacting.

The IP-FT6004 has the following outstanding features:

  • Advanced internal structure
  • Easy to re-enter, it never requires re-entry kits.
  • Fiber optic splice tray is designed in SLIDE-IN-LOCK and its opening angle is above 90 degree. Therefore it is easy and fast to increase and reduce FOST (Fiber Optic Splice Tray).
  • The housing of FOSC (Fiber Optic Splice Closure) is spacious in particular, while straight-through fiber cable is for branching application, fibers not cut off are for straight-through after being fixed and winded, fibers cut off are for branching after fusion splicing with fibers of other branching fiber cable.

All of the above features make it easy and convenient for installation, maintenance and reuse. If required, the earthing deriving device can be installed on the housing of FOSC (Fiber Optic Splice Closure) for deriving metallic parts of fiber cable for earthing connection. Pressure testing valve can be installed as well for pressure testing and sealing testing after injecting air.

Companion Products

Consider these related Infilink products as factors in your network planning:

 
 
 

Infilink Technologies
San Rafael, Californina
United States of America

Tel. No.: +1 (415) 482-6681
E-mail: customercare@infilinktechnologies.com
www.infilinktechnologies.com

 
 

 

 
 
| Home | About Us | Products & Solutions | Performance Warranty | Downloads | Contact Us | Terms of Use | Privacy Policy |
Copyright © Infilink Technologies. All rights reserved.